Screw chiller

1. Function

Screw Chilling is the equipment in Poultry Processing Line for poultry carcass or byproducts cooling down the temperature. During

operation, the chiller need to add 0-4 degrees cold water or ice, after 45-60 minutes of pre-cooling time, so that the center

temperature of products falls down from 38 degrees to below 8 degrees, effectively inhibit deterioration and carcass bacteria. The

device has the following special features and benefits:

2. Small Installation area

3. Energy dissipation area is small, saving energy.

4. Pre-cooling is good effect, the birds body are move forward with the working of spiral blade, at meanwhile, at the bottom of

the cell body through the fan continuously bubbled up, so that the body continues to roll poultry, which will intrathoracic bloody

discharge. But also to a large extent due to ease of avian body trauma caused by subcutaneous congestion.

3. All stainless steel, beautiful, no health dead clean corners for easy cleaning.

5.Rotational speed of the spindle motor can be adjusted through the inverter, the effective control of avian body pre-cooling

time.

2. Structure and Working Principle

Spiral cooling machine sub-single and dual drive in two drives, the overall cleaning section is divided into sections and

pre-cooling. By the half-cylindrical body, the spiral blade, the spindle, from poultry bucket, the driving part of the device and

other components.Always follow the principles of the work process poultry body and reverse the flow of water, which, after intake,

overflow port in front, the greatest degree of avian body clean.

The main component of the cooling machine: the cell body pre-cooling machine screw rotating blades, drive shaft, from the birds

fighting, the spindle drive gear, from birds bucket drive gear, fans, etc.